Xbox 360 backward compatibility uses "Fission", a software emulator within the system software; 104 Xbox 360 titles were supported at the feature's public launch, with more added in the following months.[214] Xbox 360 games contained within Rare Replay are packaged as standalone applications using the Xbox 360 emulation.[215] Microsoft stated that publishers would only need to provide permission to the company to allow the repackaging, and it expected the number of supported games to increase significantly over time.[216][217][218] Microsoft, along with fourteen other third-party publishers, will offer supported games, and all Games with Gold titles on Xbox 360 since November 2015 are made compatible.[184][185]
So would it be possible to utilize parts of this control just one of the buttons on the controller itself rather than it be a complete emulator? I am trying to reconfigure one of my controllers where the controller feeds to the xbox the user input that is actually coming from a code being run on the arduino.
xbox 360 emulator v1.1 serial number
Loading Device Tree to 86fe3000, end 86fee8d0 ... OKUsing machid 0x8010100 from environmentStarting kernel ...[ 0.000000] Booting Linux on physical CPU 0x0[ 0.000000] Linux version 3.14.77 (root@build-vm) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r35193) ) #1 SMP PREEMPT Fri Jun 7 14:16:10 PDT 2019[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache[ 0.000000] Machine model: Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C2[ 0.000000] Memory policy: Data cache writealloc[ 0.000000] PERCPU: Embedded 8 pages/cpu @cfdc9000 s8448 r8192 d16128 u32768[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60928[ 0.000000] Kernel command line: init=/sbin/init rootfstype=squashfs ubi.mtd=rootfs root=mtd:squashfs rootwait clk_ignore_unused[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)[ 0.000000] Memory: 235632K/245760K available (4971K kernel code, 416K rwdata, 1668K rodata, 208K init, 329K bss, 10128K reserved, 0K highmem)[ 0.000000] Virtual kernel memory layout:[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)[ 0.000000] .text : 0xc0208000 - 0xc0883e20 (6640 kB)[ 0.000000] .init : 0xc0884000 - 0xc08b8100 ( 209 kB)[ 0.000000] .data : 0xc08ba000 - 0xc0922134 ( 417 kB)[ 0.000000] .bss : 0xc0922134 - 0xc09745dc ( 330 kB)[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1[ 0.000000] Preemptible hierarchical RCU implementation.[ 0.000000] NR_IRQS:16 nr_irqs:16 16[ 0.000000] Architected cp15 timer(s) running at 48.00MHz (virt).[ 0.000009] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 2863311552512ns[ 0.000018] Switching to timer-based delay loop[ 0.000315] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000)[ 0.000334] pid_max: default: 32768 minimum: 301[ 0.000604] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)[ 0.000618] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)[ 0.011241] CPU: Testing write buffer coherency: ok[ 0.011612] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000[ 0.011684] Setting up static identity map for 0x802137b0 - 0x80213808[ 0.090609] CPU1: Booted secondary processor[ 0.090656] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001[ 0.110622] CPU2: Booted secondary processor[ 0.110660] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002[ 0.130652] CPU3: Booted secondary processor[ 0.130689] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003[ 0.130827] Brought up 4 CPUs[ 0.130869] SMP: Total of 4 processors activated (384.00 BogoMIPS).[ 0.130878] CPU: All CPU(s) started in SVC mode.[ 0.141120] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5[ 0.141502] pinctrl core: initialized pinctrl subsystem[ 0.141960] regulator-dummy: no parameters[ 0.142638] NET: Registered protocol family 16[ 0.144213] DMA: preallocated 2048 KiB pool for atomic coherent allocations[ 0.144747] cpuidle: using governor ladder[ 0.144759] cpuidle: using governor menu[ 0.152961] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 3[ 0.152970] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 2[ 0.152979] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 1[ 0.152983] hw-breakpoint: CPU 2 failed to disable vector catch[ 0.153015] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0[ 0.153103][ 0.153103] Version Rollback Feature Disabled[ 0.156463] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2[ 0.157959] sps:sps is ready.[ 0.164217] bio: create slab at 0[ 0.165929] SCSI subsystem initialized[ 0.166604] msm_bus_fabric_init_driver[ 0.166775] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100[ 0.166793] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100[ 0.166813] msm_bus_device 580000.ad-hoc-bus: Failed to get bus clk for bus4096 ctx1[ 0.166861] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100[ 0.166876] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100[ 0.166893] msm_bus_device 580000.ad-hoc-bus: Failed to get bus clk for bus1024 ctx1[ 0.193025] Bluetooth: Core ver 2.18[ 0.193095] NET: Registered protocol family 31[ 0.193106] Bluetooth: HCI device and connection manager initialized[ 0.193123] Bluetooth: HCI socket layer initialized[ 0.193138] Bluetooth: L2CAP socket layer initialized[ 0.193177] Bluetooth: SCO socket layer initialized[ 0.193520] Switched to clocksource arch_sys_counter[ 0.195362] NET: Registered protocol family 2[ 0.196636] TCP established hash table entries: 2048 (order: 1, 8192 bytes)[ 0.196684] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)[ 0.196732] TCP: Hash tables configured (established 2048 bind 2048)[ 0.196787] TCP: reno registered[ 0.196803] UDP hash table entries: 256 (order: 1, 8192 bytes)[ 0.196837] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)[ 0.197193] NET: Registered protocol family 1[ 0.197937] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available[ 0.199296] futex hash table entries: 1024 (order: 4, 65536 bytes)[ 0.208769] squashfs: version 4.0 (2009/01/31) Phillip Lougher[ 0.208785] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.[ 0.209730] msgmni has been set to 460[ 0.211406] Key type asymmetric registered[ 0.211421] Asymmetric key parser 'x509' registered[ 0.211460] io scheduler noop registered[ 0.211470] io scheduler deadline registered (default)[ 0.212299] tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7[ 0.212367] tcsr 1953000.ess_tcsr: setting ess interface select = 0[ 0.212440] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000[ 0.212500] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222[ 0.212945] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled[ 0.214100] msm_serial_hsl_probe: detected port #0 (ttyMSM0)[ 0.214141] msm_serial_hsl_probe: Bus scaling is disabled[ 0.214308] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 139, base_baud = 115200) is a MSM[ 0.214381] msm_hsl_console_setup: console setup on port #0[ 0.836739] console [ttyMSM0] enabled[ 0.840832] msm_serial_hsl_init: driver initialized[ 0.845624] qca_serial_hs module loaded[ 0.851713] sps: BAM device 0x07884000 is not registered yet.[ 0.856483] sps:BAM 0x07884000 is registered.[ 0.861684] sps:BAM 0x07884000 (va:0xd0b40000) enabled: ver:0x19, number of pipes:12[ 0.868848] m25p80 spi0.0: found mx25l1606e, expected n25q128a11[ 0.874586] m25p80 spi0.0: mx25l1606e (2048 Kbytes)[ 0.879457] 9 ofpart partitions found on MTD device spi0.0[ 0.884896] Creating 9 MTD partitions on "spi0.0":[ 0.889660] 0x000000000000-0x000000040000 : "0:SBL1"[ 0.895763] 0x000000040000-0x000000060000 : "0:MIBIB"[ 0.900830] 0x000000060000-0x0000000c0000 : "0:QSEE"[ 0.905861] 0x0000000c0000-0x0000000d0000 : "0:CDT"[ 0.910765] 0x0000000d0000-0x000000170000 : "0:APPSBL"[ 0.916006] 0x000000170000-0x000000180000 : "0:ART"[ 0.920963] 0x000000180000-0x0000001c0000 : "u_env"[ 0.925948] 0x0000001c0000-0x0000001e0000 : "s_env"[ 0.930881] 0x0000001e0000-0x000000200000 : "devinfo"[ 0.947788] libphy: ipq40xx_mdio: probed[ 0.954280] ipq40xx-mdio 90000.mdio: ipq40xx-mdio driver was registered[ 0.959916] tun: Universal TUN/TAP device driver, 1.6[ 0.964920] tun: (C) 1999-2004 Max Krasnyansky [ 0.971178] PPP generic driver version 2.4.2[ 0.975506] PPP BSD Compression module registered[ 0.980000] PPP Deflate Compression module registered[ 0.985064] NET: Registered protocol family 24[ 0.989463] i2c /dev entries driver[ 0.994537] Bluetooth: HCI UART driver ver 2.2[ 0.997948] Bluetooth: HCI H4 protocol initialized[ 1.002721] Bluetooth: HCI BCSP protocol initialized[ 1.008380] leds-pca963x 0-0062: PCA963X_HW_BLINK OFF[ 1.014912] leds-pca963x 0-0062: PCA963X LED initialize ok done[ 1.020117] hidraw: raw HID events driver (C) Jiri Kosina[ 1.034419] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xab[ 1.039740] nand: Winbond W25M02GV 256MiB 3.3V(Dual die)[ 1.045099] nand: 256MiB, SLC, page size: 2048, OOB size: 64[ 1.050689] Scanning device for bad blocks[ 1.750400] random: nonblocking pool is initialized[ 4.888042] 6 ofpart partitions found on MTD device spi0.1[ 4.892496] Creating 6 MTD partitions on "spi0.1":[ 4.897333] 0x000000000000-0x000005000000 : "kernel"[ 4.903695] 0x000000600000-0x000005000000 : "rootfs"[ 4.908929] 0x000005000000-0x00000a000000 : "alt_kernel"[ 4.914466] 0x000005600000-0x00000a000000 : "alt_rootfs"[ 4.919970] 0x00000a000000-0x00000a200000 : "sysdiag"[ 4.925122] 0x00000a200000-0x000010000000 : "syscfg"[ 4.931195] u32 classifier[ 4.932871] Performance counters on[ 4.936728] input device check on[ 4.940343] Netfilter messages via NETLINK v0.30.[ 4.945091] nfnl_acct: registering with nfnetlink.[ 4.949872] nf_conntrack version 0.5.0 (3681 buckets, 14724 max)[ 4.956399] ctnetlink v0.93: registering with nfnetlink.[ 4.961100] nf_conntrack_rtsp v0.7 loading[ 4.965290] ip_set: protocol 6[ 4.968382] gre: GRE over IPv4 demultiplexor driver[ 4.973062] ip_gre: GRE over IPv4 tunneling driver[ 4.979389] nf_nat_rtsp v0.7 loading[ 4.981968] ip_tables: (C) 2000-2006 Netfilter Core Team[ 4.987521] TCP: cubic registered[ 4.991240] NET: Registered protocol family 10[ 4.996622] ip6_tables: (C) 2000-2006 Netfilter Core Team[ 5.001331] sit: IPv6 over IPv4 tunneling driver[ 5.007484] NET: Registered protocol family 17[ 5.011035] Bridge firewalling registered[ 5.014940] Ebtables v2.0 registered[ 5.018673] Bluetooth: RFCOMM TTY layer initialized[ 5.023329] Bluetooth: RFCOMM socket layer initialized[ 5.028486] Bluetooth: RFCOMM ver 1.11[ 5.032172] Bluetooth: BNEP (Ethernet Emulation) ver 1.3[ 5.037481] Bluetooth: BNEP filters: protocol multicast[ 5.042678] Bluetooth: BNEP socket layer initialized[ 5.047631] Bluetooth: HIDP (Human Interface Emulation) ver 1.2[ 5.053538] Bluetooth: HIDP socket layer initialized[ 5.058492] l2tp_core: L2TP core driver, V2.0[ 5.062818] l2tp_ppp: PPPoL2TP kernel driver, V2.0[ 5.067594] l2tp_netlink: L2TP netlink interface[ 5.072210] 8021q: 802.1Q VLAN Support v1.8[ 5.076524] Registering SWP/SWPB emulation handler[ 5.082230] regulator-dummy: disabling[ 5.085429] UBI: attaching mtd10 to ubi0[ 9.540454] UBI: scanning is finished[ 9.627997] UBI: attached mtd10 (name "rootfs", size 74 MiB) to ubi0[ 9.633322] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes[ 9.640127] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048[ 9.646794] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096[ 9.653648] UBI: good PEBs: 592, bad PEBs: 0, corrupted PEBs: 0[ 9.659537] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128[ 9.666671] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 334632423[ 9.675610] UBI: available PEBs: 0, total reserved PEBs: 592, PEBs reserved for bad PEB handling: 40[ 9.684749] UBI: background thread "ubi_bgt0d" started, PID 74[ 9.686774] input: gpio_keys.7 as /devices/soc.0/gpio_keys.7/input/input0[ 9.687031] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)[ 9.690677] clk: Not disabling unused clocks[ 9.730243] VFS: Mounted root (squashfs filesystem) readonly on device 31:15.[ 9.736708] Freeing unused kernel memory: 208K (c0884000 - c08b8000)********************************************************************************* _ _ __ _ __ _____ __ __ _____ \ / // ____]\ \ / // ____]TM \ / / (___ \ V / (____ \ \ \ \ \____ \ \ / \____ \ _____ \ \ \ ____) ____) _________ \__ \_\[____ / _ [_____/ (c) 2013 Belkin International, Inc. and/or its affiliates. All rights reserved. Booting nodes-jr (firmware version 1.1.11.195027)*********************************************************************************[utopia][init] System Initialization[utopia][init] Creating /proc[utopia][init] Creating /sys[utopia][init] Creating /dev[utopia][init] Creating /tmp[utopia][init] Allocating 60M for /tmp[utopia][init] Prepairing /dev/pts[utopia][init] Setting /tmp and /var permissions[utopia][init] Starting udev..Attempting mount of ubifs syscfg partitionUBI device number 1, total 752 LEBs (95485952 bytes, 91.1 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)[utopia][init] Using persistent syscfg data from /var/config/syscfg[utopia][init] Starting system logging[utopia][init] Starting sysevent subsystem[utopia][init] Starting blue ...[utopia][init] Enabling DesignWare USB3 DRD Core drivers[utopia][init] Loading QCA Ethernet, NSS and GMAC driversnet.netfilter.nf_conntrack_acct = 1[utopia][init] Setting any unset system values to defaultsetting tc_ssid to REMOVED for Nodessetting tc_passphrase to REMOVED for Nodessetting up MAC addresses for all interface based on REMOVEDNTP Servers do not need to be updated[utopia][init] WARNING! new syscfg variables are found, committing default syscfg values[utopia][init] copy syscfg to /var/config/syscfg/syscfg.dat.old[utopia][init] Set smart_connect::client_pin 6381Program the switch...checking for interactive script start up...no user scheduled tasks found.../etc/init.d/service_senq.sh Setting default for debug = '0'/etc/init.d/service_senq.sh Setting default for enabled = '1'/etc/init.d/service_senq.sh Setting default for event_pause = '0'/etc/init.d/service_senq.sh Setting default for notification::enabled = '1'senq running/etc/init.d/service_senq.sh Starting in mode 01970-01-01 00:00:36: service_node-mode.sh mdnsd-status stopped: Setting default for port = '1883'1970-01-01 00:00:36: service_node-mode.sh mdnsd-status stopped: Setting default for bind_if = 'br0'1970-01-01 00:00:36: service_node-mode.sh mdnsd-status stopped: Setting default for debug = '0'1970-01-01 00:00:36: service_node-mode.sh mdnsd-status stopped: Setting default for enabled = '1'1970-01-01 00:00:36: service_node-mode.sh mdnsd-status stopped: Setting default for debug = '0'1970-01-01 00:00:36: service_node-mode.sh mdnsd-status stopped: Setting default for enabled = '1'1970-01-01 00:00:36: service_node-mode.sh mdnsd-status stopped: Setting default for master_issue_periodic_bh_speed_check = '1'1970-01-01 00:00:36: node-mode runningUpdating BootCount Page[4]:40 ... Done[utopia][init] Loading Buttons drivers[utopia][init] Load WiFi cal data from MTD(mtd5) to FS.[utopia][init] Setup link to WiFi firmware and board data (EU)[utopia][init] Multi-region is not supported or not enabled[utopia][init] Cert region: EU[utopia][init] Using EU region for WiFi firmware and board dataNSS Auto scaling disabled[utopia][init] Loading QCA Enhanced Connection managernet.bridge.bridge-nf-call-ip6tables = 0net.bridge.bridge-nf-call-iptables = 0[utopia][init] Initializing BTLE interface[utopia][init] Bluetooth Mac Address: REMOVED[utopia][init] Cert Region: EU[utopia][init] BT PSR: /etc/pb-207-rev8-CSR8811-BT4.2.psrLoading PSKEY_HCI_LMP_LOCAL_VERSION ... doneLoading PSKEY_LMP_REMOTE_VERSION ... doneLoading 0x212c ... doneLoading 0x212d ... doneLoading 0x212e ... doneLoading 0x212f ... doneLoading 0x2130 ... doneLoading 0x2131 ... doneLoading 0x2132 ... doneLoading 0x2133 ... doneLoading 0x2134 ... doneLoading 0x2135 ... doneLoading 0x2136 ... doneLoading 0x2137 ... doneLoading 0x2138 ... doneLoading 0x2139 ... doneLoading 0x2209 ... doneLoading 0x220b ... doneLoading 0x222b ... doneLoading 0x222c ... doneLoading PSKEY_HOST_INTERFACE ... doneLoading PSKEY_BDADDR ... doneLoading PSKEY_ANA_FREQ ... doneLoading PSKEY_ANA_FTRIM ... doneLoading PSKEY_LC_MAX_TX_POWER ... doneLoading 0x22c8 ... done[utopia][init] BTLE interface ready to useinserting fpbypass.ko for QCAattempting to sync sysinfo.cgi auth credentialsadding group for lldpd usernodes login: 2ff7e9595c
Comments